Paper Status Tracking
Contact us
[email protected]
Click here to send a message to me 3275638434
Paper Publishing WeChat

Article
Affiliation(s)

1. Department of Material Science and Production Engineering, Fukuoka Institute of Technology, Fukuoka 811-0295, Japan
2. Department of Electrical Engineering, Fukuoka Institute of Technology, Fukuoka 811-0295, Japan

ABSTRACT

Despite aqueous electrolytes having a low cost and excellent ionic conductivity, their low withstand voltage of 1.2 V makes them problematic for battery utility because that is a very important factor in battery production. In this research, the possibility of increasing the withstand voltage while maintaining the low cost of aqueous electrolytes was investigated. In this research, the solution electrolyte was made into a viscous solid polymer electrolyte to improve the withstand voltage of the electrolyte. A solid polymer electrolyte was made from sodium polyacrylate and doped with KOH (potassium hydroxide) and pure water. The improvement of the withstand voltage was evaluated by the specific capacitance.

KEYWORDS

Electric double layer capacitor, sodium polyacrylate, potassium hydroxide.

Cite this paper

References

About | Terms & Conditions | Issue | Privacy | Contact us
Copyright © 2001 - David Publishing Company All rights reserved, www.davidpublisher.com
3 Germay Dr., Unit 4 #4651, Wilmington DE 19804; Tel: 001-302-3943358 Email: [email protected]